- Call Us : +91- 9831294839
10000/Pieces
Valvetek Engineering’s Electrical Actuator Operated Damper combines robust damper design with an advanced electric actuator for automated airflow regulation. It is widely used in large-scale HVAC, process ventilation, and thermal systems where remote control and operational efficiency are essential.
Damper Features:
| Type Of Actuator | Electric Actuator |
| Voltage Rating | Typically 24V, 120V, Or 240V |
| Power Consumption | 5W To 40W |
| Control Signal | 0- 10V, 4-20mA, Or Digital |
| Speed Of Operation | 20 Seconds To 2 Minutes For Full Range Movement |
| Rotation Angle | Typically 90° For Most Damper |
| Finish | Polished |
| Temperature Range | 0°C To 70°C |
| Material Of Construction | Stainless Steel |
| Mounting Type | Direct Mounted On Damper Shaft |
| Operating Humidity | 0% To 95% (non-condensing) |
| Communication Protocol | Modbus RTU, BACnet MS/TP |
| Noise Level | Less Than 45 DB |
| Electrical Protection | Overload Protection, Thermal Cut-off, Or Short-circuit |
| Service Life | 50,000 To 100,000 Cycles (Varies By Actuator Size) |
| Manual Override | Available With Manual Hand-crank Option |
| Manufacture By | Valvetek Engineering |
| Origin | India |
